GNST-TA-16000
Tandem Axle Gooseneck Stock Trailer 16,000 lbs
Product specifications
The blueprint of reliability
Dimensions and capacities
Pull TypeGooseneck
Widths7'
Lengths20', 22', 24', 26' or 28'
GVWR16,000 lbs.
GAWR8,000 lbs.
Structural specs
Neck8" Channel Riser & Neck
Frame11 Ga. Sheet Metal with Angle Iron Reinforcement
Crossmembers2" x 3" Tubing & Angle Iron 3/16" x 2" x 2"
Side wall6" Metal Slats
TopAero Nose & Full Metal Top
Division Gate1 Solid Gate 20' to 22' Trailer / 2 Solid Gates 24' to 28' Trailers
Rear GateFull Swing with Half Slider
Escape door36" Side Door (Left Side)
Suspension and wheels
AxleTwo 8,000 lb Cambered Axles with elec. Brakes (Dexter Axles)
SuspensionTorsion
TireST235/75R17.5 18 PLY (Spare Tire &Wheel Included)
Wheel17-1/2" 8 Bolt
Towing and safety
Coupler2-5/16" Gooseneck Coupler (25,000 lb)
Safety chains3/8" Grd. 70 with safety Latch Hook (2 each)
Jack2) 10,000 lb Drop Leg Jack
Electrical and lighting
LightsD.O.T. Stop, Tail, Turn and Clearance (LED)
Plug7-Way RV
Floor and finish
Floor2" Treated Pine Lumber Deck
Finish prepMechanical and/or Chemical Pre-treatment for maximum Paint Adhesion & 1 Coat of Primer
FinishPainted with two Coats Automotive Quality Acrylic Enamel
Available Models
STH7020W16LNR7' x 20' Gooseneck Tandem Axle Trailer
STH7022W16LNR7' x 22' Gooseneck Tandem Axle Trailer
STH7024W16LNR7' x 24' Gooseneck Tandem Axle Trailer
STH7026W16LNR7' x 26' Gooseneck Tandem Axle Trailer
STH7028W16LNR7' x 28' Gooseneck Tandem Axle Trailer
Additional Options
1Electric Over Hydraulic Brakes
22 Speed Jack
32 Hydraulic Jacks
4Sides With 1" x 2" Tubing Instead of Metal Slats
5High Sides in Front and the back 8' with 20" sides and 1" x 2" tubing (cowboy sides)
646" Solid Sides With 2-1/2" Gap Above the Fender
752" Solid Sides
823" & 73" Slant Tack Room in Front of Trailer (includes a 3 Tier Swing out Saddle Rack)
94' Straight tack room in Front of Trailer (includes a 3 Tier Swing out Saddle Rack)
10Each Additional Saddle Rack
113 Tier Saddle Rack On Tack Room Door Instead a Swing out Saddle Rack
12If a Tack Room Option Is Added the Price Includes the Standard Cut Gates (in case of taking a cut gate out its 250.00 less)
13Sliding Window in a Tack Room Door
14Wood Floor With Back 6' Cleated Rubber Floor
15Cleated Rubber Floor
16Smooth Rubber Floor
17Rubber Mats On Top Of Wood Floor
18A Trailer With Rubber Floor and Tack Room has Rubber Mats in the Tack Room
19Spray-in Liner (minimun 12") includes runners and crossmembers on top and bottom per square foot on sides
202 Square Vents Under the Gooseneck
21Top Options: Without Nose (not available for metal top)
22Top Options: Aero Nose and Bar Top
23Top Options: Aero Nose and Full Tarp Roof
24Top Options: Aero Nose and Full Metal Top
25Gates & Escape Door Options: Add a One Piece Division Gate
26Gates & Escape Door Options: Movable Divicsion Gate (every 4' only)
27Gates & Escape Door Options: Slider or Half Swing in the Division Gate
28Gates & Escape Door Options: Butterfly Rear Gate (swings open In-outside)
29Gates & Escape Door Options: A One Piece Rear Gate
30Gates & Escape Door Options: Move Escape Door to Right Side
31Gates & Escape Door Options: 4' Escape Door
32Gates & Escape Door Options: Escape Door Behind The Tack Room
33Gates & Escape Door Options: Add a Second Door to the Tack Room
34Gates & Escape Door Options: Butterfly Door Calfgate in the Nose (instead drop down)
NOTE: Data and specifications are subject to change without prior notice due to continuous product development and improvements. All dimensions are specified with standard tires.
Related Products
Check similar products
Get in touch
We're here to keep you moving
From technical specs to order inquiries, our experts are just a message away. Reach out and experience the GR Trailers commitment.
